New Bently Nevada 990-10-50-03-CN – In Stock Vibration Transmitter

Description

Manufacturer: Bently Nevada

Model: 990-10-50-03-CN

Product Type: 990 Vibration Transmitter

Made in: U.S.A

Certificate: COO available upon request

Model Breakdown:

• 10 = 0–10 mils pp (0–250 μm pp)
• 50 = 5.0 m system length
• 03 = DIN clips and screws mounting
• CN = Country-specific approval for China

Key Features:

• Input: Works with one 3300 NSv proximity probe and extension cable
• Power Supply: +12 to +35 Vdc required
• Output: 4 to 20 mAdc, 2-wire setup
• Accuracy: ±1.5% over full range with 250 Ω load
• Current Limit: 23 mA typical

Electrical and Signal Details:

• Frequency Range: 5 Hz to 6,000 Hz (+0/-3 dB)
• Loop Resistance: Max 1,000 Ω including cable at 35 Vdc
• NOT OK Response: Output drops below 3.6 mA within 100 µs
• Recovery Time: 2–3 seconds after fault clears

Mechanical & Installation:

• Transmitter Weight: 0.43 kg (0.9 lb)
• Gap Range: 0.5–1.75 mm (20–55 mils) from target
• Minimum Target Size: 9.5 mm (0.375 in) diameter
• Max Leadwire Length: 3 meters (10 feet)

Environment:

• Zone Use: For Non-Hazardous and Zone 2 / Div 2 locations
• Recommended Power: 28 Vdc in hazardous areas

Shelf Life: 1 year from date of manufacture if stored properly

Download PDF file here:990 Vibration Transmitter Datasheet