Bently Nevad | Accelerometer Acceleration Tranducer 330425-02-00

Bently Nevada – Accelerometer Acceleration Transducers

Manufacturer: Bently Nevada

Product No.: 330425-02-00

Mounting Thread Option: 0 2 M8 X 1 integral stud

Agency Approval Option: None

Performance and Features

Sensitivity: 10.2 mV/m/s² (100 mV/g) ±5%

Acceleration Range: 490 m/s² (50 g) peak across 10 Hz to 15 kHz.

Please note that vibrations exceeding 15 kHz may impact range performance.

Amplitude Linearity: ±1% to 490 m/s² (50 g) peak.

Frequency Response: 10 Hz to 15 kHz ±3dB; 30 Hz to 10 kHz ±10%

Engineered for exceptional precision in high-frequency vibration environments.

Environmental and Durability Aspects

Operating Temperature: -55°C to +121°C (-67°F to +250°F)

Shock Survivability: 49,050 m/s² (5000 g) peak, ensuring robust performance.

Relative Humidity: 100% condensing; hermetically sealed for durability.

IP Rating: IP 68 rated for dust and water protection (sensor only).

Base Strain & Power Details

Maximum Cable Length: 305 metres (1000 ft) with no signal degradation.

Base Strain Sensitivity:

• For units with serial number starting with “G”: 49 mm/s²/mstrain (0.005 g/mstrain)
• For older units: 980 mm/s²/mstrain (0.100 g/mstrain) without Mounting Base; 4.9 mm/s²/mstrain (0.0005 g/mstrain) with the base.

Power Requirements:

• Input Voltage: -24 ± 0.5 Vdc
• Bias Current: 2 mA nominal
• Output Bias Voltage: -8.5 ± 0.5 Vdc
• Grounding: Case isolated

Physical Characteristics

Weight: 99 g (3.5 oz), typical.

Diameter: 23 mm (0.93 in).

Height: 59 mm (2.3 in), including mounting stud.

Connector: 3-pin MIL-C-5015 Receptacle, made of 316L stainless steel.

Mounting Torque: 4.1 N·m (3.0 ft·lb).

Mounting Angle: Flexible; supports any orientation for installation.

Contact Information

For inquiries, please contact: sales@nex-auto.com